In a lot of cases you can also use Aluminum instead of copper. You need thicker wires and it’s less flexible, but it’s doable and cheaper. Some old electric motors from the eastern block used aluminium coils for that matter, because copper was much more expensive there.
Aluminium is actually a better conductor than copper when you judge it by mass, not volume. I think also by tensile strength.
In any case there’s a reason that large overland wires aren’t copper, but steel-cladded aluminium. Copper will always have its applications but so does gold and yet we’re not running out of gold to plate connections with.
In cases like windings requiring more volume is actually an issue, in the case of PCBs… no, despite Apple’s insistence, it’s actually fine to have a phone that’s 0.2mm thicker.
The US is allergic to it, but needs to get over it.
Aluminum wire was tried in the 1970s due to a spike in copper prices. The problem was that they just tried to swap it right in. Aluminum and copper have different rates of expansion. Over time, that would slowly loosen the connectors, and the wires would pop right out and cause a fire.
You can design connectors to handle both, and you’ll see many electrical things today specify that they’re good for aluminum or copper wire. It still has a bad reputation among electricians; they haven’t unlearned the problem yet.
Now, one place it’s more of a problem is in things like transformer windings. There are kilometers of wiring in any of them, so the higher resistance of aluminum is a problem.
Now, one place it’s more of a problem is in things like transformer windings. There are kilometers of wiring in any of them, so the higher resistance of aluminum is a problem.
Is it? As far as I know you can use a larger diameter wire to get the same resistance as copper, if your device has enough space for bigger coils.
Its not just electricians, its got a stigma that seems really hard to overcome without some sort of education campaign. People wont buy a place that has aluminum wires.
In a lot of cases you can also use Aluminum instead of copper. You need thicker wires and it’s less flexible, but it’s doable and cheaper. Some old electric motors from the eastern block used aluminium coils for that matter, because copper was much more expensive there.
Aluminium is actually a better conductor than copper when you judge it by mass, not volume. I think also by tensile strength.
In any case there’s a reason that large overland wires aren’t copper, but steel-cladded aluminium. Copper will always have its applications but so does gold and yet we’re not running out of gold to plate connections with.
In cases like windings requiring more volume is actually an issue, in the case of PCBs… no, despite Apple’s insistence, it’s actually fine to have a phone that’s 0.2mm thicker.
The US is allergic to it, but needs to get over it.
Aluminum wire was tried in the 1970s due to a spike in copper prices. The problem was that they just tried to swap it right in. Aluminum and copper have different rates of expansion. Over time, that would slowly loosen the connectors, and the wires would pop right out and cause a fire.
You can design connectors to handle both, and you’ll see many electrical things today specify that they’re good for aluminum or copper wire. It still has a bad reputation among electricians; they haven’t unlearned the problem yet.
Now, one place it’s more of a problem is in things like transformer windings. There are kilometers of wiring in any of them, so the higher resistance of aluminum is a problem.
Is it? As far as I know you can use a larger diameter wire to get the same resistance as copper, if your device has enough space for bigger coils.
You’re trying to transmit power via magnetism so distance is an issue.
Its not just electricians, its got a stigma that seems really hard to overcome without some sort of education campaign. People wont buy a place that has aluminum wires.